Current Dekimo Embedded Challenge Reigning Champion:

Matthias Leys

Matthias Leys

Current Dekimo Embedded Challenge Reigning Champion:

Matthias Leys

Matthias Leys

Dekimo Embedded Challenge: Race of Champions

In this fifth edition of the Dekimo embedded challenge, we are going to use the Arduino for controlling a self-driving car on a virtual race circuit. The previous Dekimo Embedded Challenges can be viewed here.

This challenge

Prior to the corona pandemic there used to be an annual robot competition at the UGent where Dekimo was the main sponsor. Participants had to build a fully autonomous robot capable of navigating a course. To assist the robot a line was marked on the course.

Now, we are replicating the same concept in a COVID-safe virtual environment. Each entry will be loaded into an Arduino connected to the PC via USB. The PC runs software in which the car can navigate the race circuit. The PC transmits the car’s state to the Arduino, and the Arduino responds with steering instructions for the car.

The necessary  PC software

The PC software is available on the following link:
https://nextcloud.dekimo.com/index.php/s/Nz4J6MqQ3cGEJNa

This application is written in .NET. It is possible that you may need to install the .NET runtime on your PC first. We solemnly swear that our program, which is an executable, does not collect data, read or write files, engage in network communication, or perform any malicious activities on your PC. However, you are, of course, free to complete the exercise without using this software.

The circuits

Entries will be tested on five different race circuits. These circuits become progressively more difficult and challenging. The winner is the participant who successfully completes the most circuits. In the event of a tie, the participant with the fastest time on the last completed circuit will be declared the winner. We assume that most entries will complete all circuits successfully, so the ultimate winner will need to strive to race faster than the competition!

The very first challenger has to beat our own Dekimo home implementation. As in previous editions of the challenge, there is ample room for improvement to secure a prize and become the new champion.

Each time someone breaks the existing record, that person will receive a nice prize and the name of the new record holder will be mentioned on the website.

Please note that the technical details of the assignment are further explained in the PDF that will be received after registration.

This competition is exclusively for students from Belgium, the Netherlands and the Aachen region. Any questions? Do not hesitate to contact us via the e-mail address: studentchallenge at dekimo.com

Get your Arduino here with detailed instructions and join the challenge!

To participate, it is necessary to fill in the form. We need the address to send the parcel. Your data will not be used for other purposes.

Whoever beats the current reigning champion, may choose from one of the prizes below

  •  Arduino Starter Kit
  • Raspberry Pi 5
  • Bluetooth speaker JBL Flip 6
  • Headset HyperX Cloud II
  • Google Nest Hub 2
  • Google Chromecast 4K
  • Game of your choice at Coolblue

Whoever beats the current reigning champion, may choose from one of the prizes below

  •  Arduino Starter Kit
  • Raspberry Pi 5
  • Bluetooth speaker JBL Flip 6
  • Headset HyperX Cloud II
  • Google Nest Hub 2
  • Google Chromecast 4K
  • Game of your choice at Coolblue

Challenge completed? Upload your firmware here.

We expect a .ino file or a .zip as source code for Arduino firmware.
Note: We accept only one entry per participant.

Scoreboard Embedded Challenge

DatumNaamCircuit 1Circuit 2Circuit 3Circuit 4Circuit 527/04/2024Gert Heyns673—-

21/05/2024 Matthias Leys 663 823 881 1174 1204
28/05/2024 Kurt Santelé 686 991 1622 1493 2433
19/04/2024 Tom De Puysseleyr 673 1513 2723 1168 3434
18/04/2024 Iris Gijsbers 669 778 838 935 –
10/04/2024 Tuur Vernieuwe 682 799 822 1055 –
16/04/2024 Sarah Vandenbroucke 680 1019 1336 1102 –
25/04/2024 Joey De Pauw 689 1175 1778 1268 –
27/04/2024 Francis Ide 737 881 965 1370 –
16/05/2024 Wim Van Loon 709 2621 5106 1382 –
27/04/2024 Randy Paredis 676 1135 1780 1503 –
14/04/2024 Thomas De Smedt 1068 1782 2554 1589 –
25/04/2024 Lars Vagenende 676 845 1093 1698 –
04/04/2024 Matis De Schutter 1118 1460 2044 2752 –
19/05/2024 Yannick Van Haver 807 1630 4282 3143 –
14/04/2024 Thomas Lefever- Teughels 2731 4016 3985 3928 –
09/05/2024 Timmy Simons 672 785 – – –
14/04/2024 Rob Coenen 675 816 – – –
14/04/2024 Rob Coenen 675 791 – – –
27/04/2024 Bert Van Dooren 672 820 – – –
25/04/2024 Tobias Nuyttens 734 863 – – –
01/06/2024 Sven Degroote 672 903 – – –
16/05/2024 Bruce Helsen 668 937 – – –
26/04/2024 Alexandros Karanastasis 895 1040 – – –
17/04/2024 Ilja Vandewalle 733 1095 – – –
16/04/2024 Tom Boschan 681 1115 – – –
22/04/2024 Fleur Slabbinck 664 1116 – – –
15/04/2024 Lowie De Smet 966 1143 – – –
14/04/2024 Gilles Vancanneyt 711 1230 – – –
24/04/2024 Filip Vagenende 696 1256 – – –
18/04/2024 Pieter Soetaert 5023 7166 – – –
23/06/2024 Wim De Roeve 662 – – – –
16/04/2024 Niek Van Dommelen 668 – – – –
26/04/2024 Jeroen Deviaene 669 – – – –
23/04/2024 Jonas Vanroose 673 – – – –
16/05/2024 Koen Jacobs 673 – – – –
21/04/2024 Clement Peleman 674 – – – –
15/05/2024 Bernd De Baere 674 – – – –
14/04/2024 Kevin Das 676 – – – –
14/04/2024 Wim De Vlaminck 678 – – – –
10/04/2024 Leon Vandenberghe 679 – – – –
11/04/2024 Sven Bernaerts 680 – – – –
19/01/2025 Gauthier Bouche 683 – – – –
23/05/2024 Kevin Renaers 695 – – – –
11/04/2024 Albert Jorissen 718 – – – –
17/04/2024 Max Groothuis 740 – – – –
05/05/2024 Raf Flamand 777 – – – –
13/04/2024 Wouter Aerts 789 – – – –
23/04/2024 Seppe Stroobant 881 – – – –
06/04/2024 Filip Vandenberghe 6173 – – – –

Dekimo Embedded Challenge: Race of Champions

In this fifth edition of the Dekimo embedded challenge, we are going to use the Arduino for controlling a self-driving car on a virtual race circuit. The previous Dekimo Embedded Challenges can be viewed here.

This challenge

Prior to the corona pandemic there used to be an annual robot competition at the UGent where Dekimo was the main sponsor. Participants had to build a fully autonomous robot capable of navigating a course. To assist the robot a line was marked on the course.

Now, we are replicating the same concept in a COVID-safe virtual environment. Each entry will be loaded into an Arduino connected to the PC via USB. The PC runs software in which the car can navigate the race circuit. The PC transmits the car’s state to the Arduino, and the Arduino responds with steering instructions for the car.
 

The necessary  PC software

The PC software is available on the following link:
https://nextcloud.dekimo.com/index.php/s/Nz4J6MqQ3cGEJNa

This application is written in .NET. It is possible that you may need to install the .NET runtime on your PC first. We solemnly swear that our program, which is an executable, does not collect data, read or write files, engage in network communication, or perform any malicious activities on your PC. However, you are, of course, free to complete the exercise without using this software.

Entries will be tested on five different race circuits. These circuits become progressively more difficult and challenging. The winner is the participant who successfully completes the most circuits. In the event of a tie, the participant with the fastest time on the last completed circuit will be declared the winner. We assume that most entries will complete all circuits successfully, so the ultimate winner will need to strive to race faster than the competition!

The very first challenger has to beat our own Dekimo home implementation. As in previous editions of the challenge, there is ample room for improvement to secure a prize and become the new champion.

Each time someone breaks the existing record, that person will receive a nice prize and the name of the new record holder will be mentioned on the website.

Please note that the technical details of the assignment are further explained in the PDF that will be received after registration.

This competition is exclusively for students from Belgium, the Netherlands and the Aachen region. Any questions? Do not hesitate to contact us via the e-mail address: studentchallenge at dekimo.com

De inschrijfperiode voor onze wedstrijd is helaas voorbij.

Volg onze LinkedIn-pagina om de volgende Dekimo Embedded Challenge niet te missen.

This website uses cookies to ensure you get the best experience on our website.